Hello everybody Today we act VPN situates on D-Link wifi router There are 2 ways to setup VPN Method 1: PPTP to access configuration utility, open a web browser such as google chrome and penetrate 192.168.0.1 in the address environment 192.168.0.1 User name is Admin Password is blank Login OK Logged in successfully You continue to set up PPTP VPN Setup >> Internet Setup WAN Access Type: DHCP Client Click “Apply Changes” to save the arranges Left menu select PPTP select Enable Enter the compensate PPTP VPN authentication information The IP address of the PPTP VPN server is here with you this ip address will be different Next enter your vpn account After installing is complete, click “Apply” to save Status You assure the facility results now WAN Configuration Setup >> PPTP PPTP Table Connected Install PPTP VPN successfully Next we perform the L2TP VPN installation L2TP VPN Open a web browser In the address barroom register 192.168.0.1 Username: Admin Password is space Login >> OK Setup >> Internet Setup WAN Access Type: DHCP Client Click “Apply Changes” to save the fixes Setup >> L2TP Session: Enable Enter the required information here Enter the ip address of L2TP server now LNS IP Note, when you install the information here will be different Enter your vpn detail accurately The lesson here is username netvn, the password is 123 Click “Apply Changes” to save the defines wait a minute Successful VPN connection This is the information after connecting L2TP Table Thanks for watchingDon’t forget to Like and Subscribe
